Vertical Form Fill Seal Auger Filler System with Nitrogen Flushing
This vertical form fill seal (VFFS) packaging solution was factory-tested for a food powder manufacturer in Indonesia packing 500 g non-dairy creamer powder into four-layer aluminum-foil gusseted pillow bags. Combining an intermittent VFFS powder packaging machine, servo auger filler, nitrogen flushing, and pneumatic ribbon date coding, the system delivers uniform fill weights and moisture-tight seals at 27–30 bags/min.
Factory Running Video
Factory trial video showing 500 g creamer powder dosing, 360 mm laminated foil tracking, nitrogen gas flushing, ribbon date coding, and side-gusset pillow bag sealing at 29 bags/min.
Machine, Pouches & Material Gallery
Packaging Challenges for Hygroscopic Creamer Powder
Fine dairy and non-dairy creamer powders quickly absorb ambient moisture and bridge inside unagitated hoppers, requiring controlled metering, oxygen displacement, and stable sealing on laminated aluminum foil.
Engineered Vertical Form Fill Seal Solution
Servo Auger Metering Within ±1% Accuracy
A top-mounted servo auger filler with a 45 L SS304 hopper doses 500 g per cycle at 10.05 programmed auger turns, minimizing dusting and weight variance across the 10–1000 g machine range.
Side-Gusset Forming & Multi-Layer Foil Sealing
The forming collar shapes a crisp 120 × 250 mm pillow pouch with 23 mm side gussets and a 14 mm center fin seal, while PID-regulated horizontal sealing jaws lock the four-layer aluminum foil structure.
Integrated Nitrogen Flushing & Date Coding
An integrated nitrogen flushing tube purges headspace oxygen immediately before transverse sealing, paired with an inline pneumatic thermal-ribbon date coder for sharp batch and expiry marking.
PLC Synchronization & Eye-Mark Registration
Siemens PLC logic and a WEINVIEW HMI coordinate dual servo film-pulling belts and black eye-mark sensing on 360 mm laminated foil rolls at a steady 27–30 bags/min output.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Machine Model | VFJ-P420 Powder Packaging System (VFJ-420 VFFS Bagger + Servo Auger Filler) |
| Bag Style & Target Size | Gusseted pillow bag (no hang hole); 120 mm face width (+ 23 × 2 mm side gussets) × 250 mm length; 12.5 mm horizontal crimp seals, 14 mm back fin seal |
| Machine Film & Bag Range | Max film roll width 420 mm (client film 360 mm); bag width 50–200 mm, bag length 50–300 mm |
| Dosing System & Range | Servo auger filler (45 L SS304 hopper); machine range 10–1000 g (150–1200 ml), target weight 500 g; accuracy ≤ ±1% |
| Operating Speed | 27–30 bags/min on 500 g creamer powder (HMI verified 29 bags/min); VFFS rated 5–65 bags/min (product-dependent) |
| Packaging Material | PET12 / PE15 / ALU7 / SPE40 four-layer foil laminate (black eye mark); supports heat-sealable laminates & monolayer PE film |
| Gas Flushing & Coding | Integrated nitrogen gas flushing device + pneumatic thermal-ribbon date coder (optional TTO or inkjet) |
| Control & Contact Parts | Siemens PLC + WEINVIEW touch screen HMI; all product-contact surfaces in SUS304 stainless steel or food-grade polymer |
| Utilities & Machine Footprint | Customized 380V / 3-Phase / 50 Hz; compressed air 0.65 MPa, 0.3 m³/min; bagger 1080 × 1300 × 1400 mm (600 kg), auger filler 1060 × 600 × 1100 mm (200 kg) |
More Powder & VFFS Packaging Applications
From side-gusset coffee powder lines to 1–5 kg flour VFFS systems, our vertical form fill and seal portfolio adapts across pillow, gusseted, and quad-seal powder pouches.
FAQ
Yes. On this vertical form fill seal powder machine, switching between side-gusseted pouches, flat pillow bags, and hole-punched formats only requires fitting the matched stainless-steel forming collar and tube for each bag width. The PLC and touch-screen HMI store 8–10 preset recipes so operators switch bag cut length, auger revolutions, and film-pull timing in a single tap.
On this vertical form fill seal machine, operators can run monolayer PE film as well as multi-layer heat-sealable laminates (such as PET/PE, PET/ALU/PE, and BOPP/CPP) on Ø75 mm film cores with a 10 mm edge margin. Optical-fiber color-mark calibration locks ON over black registration marks and OFF over reflective foil, while PID jaw controllers and built-in fault interlocks pause operation immediately if jaw heat drops more than 10 °C below setpoint or film tracking drifts.
On this auger filler VFFS powder packaging machine, the SUS304 conical hopper uses a quick-clamp split-open housing so operators can unlatch the side wall, wipe product-contact stainless surfaces, and inspect the auger screw without tools during recipe changeovers. An enclosed lower drive compartment isolates the transmission and PLC/pneumatic cabinets from airborne fine dust while the flush tube purges headspace gas before sealing.
Yes. Beyond a standalone VFFS auger-filler system, this powder packaging machine integrates with an inclined screw auger feeder or vacuum conveyor featuring automatic hopper level sensors (auto-start/stop feeding) and a finished-bag take-away conveyor. Inline batch coding supports pneumatic thermal-ribbon printers (1–3 lines, up to 150 prints/min on ≤35 mm ribbon) or optional thermal-transfer and inkjet coders, plus checkweighers or metal detectors.













